Description
Solutions for Thermo-Ablation with RF medical technologies
Temperature Mode for ELRATM
This mode is temperature controlled system. It is applied to generator with pre-setting value (Temperature, Power, and Tie) before procedure. Automatically, it begins to operate at a specific temperature, power output and time duration
Continuance Mode for EUSRATM
The RF power output is generated continuously with the setting value until the impedance value reaches 800 ohms
Under Continuance Mode, EUSRATM has to connect with VIVA PUMP for cooling inside of the needle
VIVA PUMP
“Internal cooling system” – VIVA PUMP circulates saline through the electrode to lower the temperature around the active tip of the electrode, inducing larger volume of tissue and eliminate tissue charring
User Interface Description |
|
No |
Feature Name |
1 |
OHM/RESET button |
2 |
MODE selction button |
3 |
Part for indicating the operation status |
4 |
RF START/STOP button |
5 |
RF POWER control dial |
6 |
RF CABLE connector |
7 |
GROUND PADS connectors |
8 |
Temperature display |
9 |
TIME display |
10 |
Impedance display |
11 |
Watt display |